GT光學指紋感測器  

GT光學指紋感測器 UART介面


Mechanical Dimension

Product No:GTM-5110 C21

Application :
Support one UART port.
Door Lock , Safety Box, Luggage Lock , Brief Case, Padlock, Remote Controller, Toy, POS,Time Attendance System…etc.

Key Features

Convenient & Safe & Facilitation - Just one touch and easy to enroll.

Durable - Resist static electricity and other tough environment.

Small Size is easy to integrate to any portable device.

Stable - Works well with dry, moist or rough fingerprints.

Anti fake fingerprint(option).

High C/P Ratio - Low cost with high performance.

low power consumption.

Finger press shift  for free angle


Technical Spec:

MCU   A1 (ARM Cortex M3 core)
Sensor Gingy  optical area fingerprint sensor
Mechanical dimension (WxLxH) 21 x 36 x 7.5 (mm)
Effective sensing area 14 x 12.5 (mm)
Resolution 450 dpi
Maxium number of fingerprints 20 sets (fingerprints)
Interface UART, default baud rate=9600 bps after power on
Matching Mode 1:1 ; 1:N
The size of template 506 Bytes(template)
FAR ; FRR   1/100,000 ; 1/1,000
Enrollment  time ;  Identification time <3 seconds. ; <1.5 second.
Fingerprint press shift for free angle 360°
Operating temperature   -20℃ ~ 60℃
Storage temperature & humidity   60℃ , 90%±3%  RH
Operating voltage      DC 3.3V~6V
Power consumption     ≦ 130 mA


 

Mechanical Dimension

Product No:GTM-5110 C31/C51

Application :
Support  one UART port.
Door Lock , Safety Box, Luggage Lock , Brief Case, Padlock, Remote Controller, Toy, POS,Time Attendance System…etc.

Key Features

Convenient & Safe & Facilitation - Just one touch and easy to enroll.

Durable - Resist static electricity and other tough environment.

Small Size is easy to integrate to any portable device.

Stable - Works well with dry, moist or rough fingerprints.

Anti fake fingerprint(option).

High C/P Ratio - Low cost with high performance.

low power consumption.

Finger press shift  for free angle


Technical Spec:

MCU   A1 (ARM Cortex M3 core)
Sensor Gingy optical area fingerprint sensor
Mechanical dimension (WxLxH) 21 x 36 x 7.5 (mm)
Effective sensing area 14 x 12.5 (mm)
Resolution 450 dpi
Maxium number of fingerprints C31: 200 sets ; C51: 2000 sets (fingerprints)
Interface UART, default baud rate=9600 bps after power on
Matching Mode 1:1 ; 1:N
The size of template 496 Bytes(template)+2 Bytes(checksum)
FAR ; FRR   1/100,000 ; 1/1,000
Enrollment  time   <3 seconds.
Identification time    C31<1 second ; C51<1.5 seconds.
Fingerprint press shift for free angle 360°
Operating temperature  -20℃ ~ 60℃
Storage temperature & humidity 60℃ , 90%±3% RH
Operating voltage    DC 3.3V~6V
Power consumption   ≦ 130 mA






















 


金佶科技所提供的各種款式『指紋感測器』與『嵌入式指紋辨識模組』,由於其是屬於CMOS面型,因此使用者只要任何一根手指頭朝下輕輕壓在『指紋感測器』平板上面,就會啟動指紋感測器,當取得影像之後,將資料從類比轉換成數位格式,取得特徵點後,再和已儲存的特徵點進行比對辨識,只要符合比對標準點數後,就完成辨識認證。